Alfagomma – Authorized DistributorTFS Oleodinamica

Authorized Alfagomma Distributor in Italy

Contattaci per assistenza o preventivi

Alfagomma FLEXOR FLEXOPAK – tubi idraulici trecciati e spiralati – TFS Service Partner

Braided and spiral hydraulic hoses

FLEXOR and FLEXOPAK ranges compliant with SAE 100R1–R17 and EN 853/856/857. Inner diameters from 5 to 76 mm, ranging from a single textile braid to four steel spirals, with operating pressures up to the ultra-high-pressure mining range.

Discover hydraulic hoses →

Alfagomma – raccordi e adattatori idraulici per tubi oleodinamici – TFS Service Partner

Hydraulic fittings and adapters

Standard, Multispiral, and Interlock versions in carbon steel and stainless steel. BSP, NPT, Metric, JIC, ORFS, and SAE connections. Pressures up to 2,750 bar (40,000 PSI). Patented Top Coat ATC anti-corrosion treatment.

Discover the fittings →

Alfagomma ARGUS – innesti rapidi multiconnessione per tubi oleodinamici – TFS Service Partner

ARGUS multi-connection quick couplings

Argus brand, manufactured in Italy since 1936. Pop-up, flat-face, and screw-type quick-connect couplings compliant with ISO 7241-1 A/B, ISO 5675, and ISO 16028. BSPP from 1/4" to 1 1/2", temperature range from -30 to +125 °C. Multi-K system available.

Discover the quick-connect fittings →

Alfagomma – tubi industriali aria acqua vapore alimentare – TFS Service Partner

Industrial hoses for air, water, steam, food

Industrial hoses for air, water, steam, food, petrochemical, abrasives, and mining. PVC discharge 6–51 mm, PVC suction 20–305 mm, mandrel 13–508 mm, stainless steel corrugated 6–200 mm with a temperature range of –270 to +700 °C.

Discover industrial hoses →

Alfagomma: 70 years of Made in Italy in fluid power

Founded in 1956 in Monza by Engineer Felice Gennasio, Alfagomma is today one of the few Italian industrial groups capable of covering the entire fluid power chain: flexible hydraulic hoses, fittings and adapters, Argus-brand quick couplings, industrial rubber and PVC hoses, rigid shaped hoses, and marine hoses for Oil & Gas. The headquarters are in Vimercate (MB), with Italian plants located in Lombardy (Bellusco, Castello Brianza), Abruzzo (Teramo, Cellino Attanasio, Ortona), and Calabria (Cosenza), with a network of over 26 production sites and 90 branches in 100 countries.

The group’s technical strength is measured by three figures: hydraulic hoses with inner diameters ranging from 5 to 76 mm and fittings compliant with SAE, EN, DIN, ISO, and JIC standards up to 2,750 bar (40,000 PSI); industrial PVC pipes up to 305 mm and stainless steel corrugated pipes from –270 to +700 °C; an Oil & Gas range certified to API 7K, API 16D, and API 17K for drilling, blowout preventers, and subsea marine pipes.

In-house developed technologies such as the patented Top Coat ATC treatment—trivalent Cr-III passivation tested to ASTM B117-03 and UNI ISO 9227, over 1,000 hours of resistance to red rust – and the Argus Multi-K multi-connection system are the result of decades of co-engineering partnerships with global OEMs in the earthmoving, agricultural, and oil & gas sectors (Caterpillar, John Deere, CNH Industrial). The group is ISO 9001 certified across all facilities and ISO 14001 certified at 9 production sites.

The sectors where Alfagomma makes a difference

The Alfagomma range covers ten industrial sectors. For the TFS customer portfolio, six are particularly relevant:

Earthmoving and construction – excavators, loaders, cranes, dump trucks, concrete mixers: 4SP/4SH spiral hoses, Multispiral fittings, swivel joints for articulated booms.
Oil & Gas – offshore/onshore drilling and production: API 7K cementing, API 16D blowout preventers, API 1502 hammer unions.
Marine and Oil & Marine – oil, fuel, and seawater transfer with IACS type approval; CALM/SPM systems and GMPHOM 2009 marine breakaway couplings.
Steel, Presses, and Paper Industry – 4SP spiral hoses, rigid shaped tubing with NAS 5 / ISO 4406 16/14/11 cleanliness for servo valves, stainless steel corrugated hoses for steel mills and paper mills.
Agriculture and forestry – tractors, combine harvesters, harvesters: Minetuff abrasion-resistant coatings, Alfabiotech range for biodegradable oils.
Mining – MSHA and FRAS-compliant hoses, ultra-high-pressure spiral hoses, composites, and spindles for abrasive slurries.

Why buy Alfagomma from TFS Oleodinamica

TFS Oleodinamica, a Bosch Rexroth Certified Excellence Service Partner since 1997, integrates Alfagomma products into its services, which include design, construction of hydraulic power units, hose assembly, and component overhaul. Italian customers find in TFS a single point of contact for pumps, valves, hoses, and fittings—without having to manage multiple suppliers for the same system.

Local stock in Battipaglia of FLEXOR hoses, Argus fittings, and quick-connect couplings in the most commonly used sizes.
In-house hose assembly ranging from micro-hoses to 3" R15-type hoses, with crimping according to official Alfagomma specifications.
Burst testing bench and inspection with issuance of RINA certification or TFS certificate—particularly valued in the marine and steel industries.
On-site and in-house technical support for hydraulic sizing, selection of cover types (standard, Minetuff, MSHA, FRAS), and chemical compatibility with the process fluid.
Short lead times on custom assemblies thanks to in-house assembly and direct communication with Alfagomma’s Italian plants in Cosenza, Teramo, and Bellusco.
Support for Industry 4.0 revamping projects, including pipe replacement and pressure standard upgrades.

Do you have a custom assembly to build, a system to upgrade, or a project in the sizing phase? Contact the TFS technical team—we work with the entire Alfagomma range, featuring local stock, in-house assembly, and certified testing.